SPX RD8100 PXL

Brand: SPX

RD8100 PXL Cable and Pipe Locator

The RD8100 cable locator range is engineered to deliver high precision for damage prevention when locating buried cables and pipes. This advanced range of underground utility locators is backed with a 3‑year warranty.


Features

  • 13 Locate Frequencies- Active frequencies are used in conjunction with a transmitter either in induction, direct connection or signal clamp. 
    Direct Connection is applying a transmitter signal directly onto the metallic part of a cable or pipe.
    Signal Clamping is used to apply a transmitter signal safely to a cable or pipe with disrupting the supply.
    The Induction method is used when it is not possible to apply a signal from the transmitter directly on to a cable or pipe.
    The choice of signal frequency is an important factor for effective tracing and identification of buried lines. There is no single frequency that covers all conditions. 
    Low Frequency 512Hz - This low frequency is most useful for line tracing and identification over long distances. It does not couple easily to unwanted lines and it is too low for induction. 
    Medium Frequency 8kHz - This medium frequency is the most useful general-purpose signal, high enough for induction, with limited coupling to wanted lines. It may not be high enough to impose a strong signal on small diameter line like telecom cables.
    Higher Frequency 33kHz - This higher frequency is easily applied by induction to most lines, so it is very useful for initial search. It travels on small diameter lines. However, It couples more easily to unwanted lines, and loses its strength over shorter distances than lower frequencies. 
    Very High Frequencies 100kHz and Above - This very high frequency range deals with the difficult cases – induction onto small diameter lines in dry sandy soil, and short lengths of cable. It is very easy to apply by induction but it couples very easily to unwanted lines, and does not travel far.
  • 4 Sonde Frequencies- Sondes are battery powered signal transmitters for tracing or locating non conductive utilities. 
    Examples of utilities can be; pipes, ducts, sewers and drains.
  • 2 Passive Modes
    PeakFor precise locating prior to and during excavation. Displays the strongest response when directly above a cable. Depth and current measurements are also shown.
    Null - For long distance marking of single utilities in non-congestion areas. Arrows and audio signals indicate where the cable is relative to the operator. A null response is displayed above the cable.
  • Power Filters - When a signal transmitter can't be connected, tracing individual power lines through dense networks can be a real challenge. Conflicting or powerful signals confuse or combine to create a wash of signal. A single key press uses harmonic properties of power signals to establish if a signal comes from one source, or from multiple cables which you can then trace and mark.
  • 4 kHz Frequency - The 4 kHz locate frequency enables lines such as twisted pair telecoms or street lighting to be traced over longer distances. Since such utilities are often found in areas of dense infrastructure.
  • iLOC - Allows the user to save time on site by controlling the transmitter from distances of up to 1400ft / 450 meters.

Options

  • Lithium-Ion Battery - Lithium-Ion rechargeable battery options for both locator and transmitter provide extended runtime with reduced running costs.